Connect with us

10 Different Types of Architect Tools

Architect Tool

Tools & Hardware

10 Different Types of Architect Tools

10 Different Types of Architect Tools

If you are planning to study architecture, you will learn ahead about how to create different models, plans, and designs. To make each one of your creations outstand, you would require many tools, excellent materials, and a skilled labor force.

Skilled labor can be hard to find if you decide to find them by looking around in the area of your interest. To make it a lot easier for you, many online websites like easefix offer certified skilled labor to perform your required tasks according to your taste.

Material selection is one of the critical choices to make. It is wiser to buy a good quality product that does not cost a fortune. There is no need to run after brands when the local quality is competitive enough.

Apart from these, the essential element for architects is the tools that are no less than a magic wand. This article discusses the architect tools in depth in the later section.

10 Architect tools you should know about

Architect tools hold immense importance for architecture students as it allows them to shape their plans which eventually shape their future. Here is a list of architectural tools that all architecture students should know about;


  • Tracing Paper


The first crucial tool is tracing paper. You require certain copies of your plan or work when to produce stencils when creating various designs. This is where tracing does the magic.

Tracing paper is a transparent paper that allows you to copy your original design onto another piece of paper perfectly. You can use a pen, pencil, ink pen, felt tip markers, or charcoal over the paper to copy the design.


  • Cutting Mat 


In architecture, students have to draw or cut designs from different angles. Cutting on desks or other surfaces might leave permanent scratches or marks, which is not good, especially if the property does not belong to you.

Cutting mats provide a base to work on while keeping the surface below safe. Cutting different angles on a carpet is much more comfortable than on any stable surface.


  • Mechanical pencil


Traditional wooden pencils quickly lose their grip or sharpness, so they only work fine for architects. They need something long-lasting and easy to use. On the other hand, mechanical pencils provide more precise and consistent writing when making architectural designs or ruler-based drawings.

The Rotring 600 mechanical pencil is an all-rounder solution to your drafting and sketching needs. It has a metal body for easy grip and is intuitively designed to allow you to work for hours without getting your hands sore.


  • Electric Eraser


With electric erasers, you don’t have to wriggle your hands to remove the errors in your drawing. This will ease your hand from the fatigue it used to have. The AFMAT rechargeable electric eraser help make precise changes to the work. It is designed intelligently to be as convenient in use as possible.


  • Scale ruler


A scale ruler is a must-have in your tool kit. Architecture holds mathematics and angles close to its heart. A single wrong line and your design might be in danger. Every line drawn has to be consistent with a scale, so it must be measured accurately using a scale ruler.

The triangular scale ruler features leaser cut prints that will not fade or scratch off. Aluminum builds to make the ruler stronger. The scales are given different colors to identify the one which suits what use efficiently.


  • Measuring tape


A measuring tape is a flexible ruler with a more excellent range of readings. The tool is portable, and the mapping is more precise. Rulers are tough; they cannot measure nooks and corners while measuring tapes can measure every inch well.

The hook at the end of the tape tool can hang with your piece of clothing so that you do not have to take it out every time. It also prevents the measuring tape from rolling back into the case while you are still taking the reading.


  • Drafting tapes


Have you ever experienced paper flying because of wind/fan disrupting your drawing? It is the worst that could happen to anyone, nevertheless an architect. The sketching on the paper must be accurate to every point and should not have any space for errors.

A drafting tape helps temporarily stick the paper to the board. This way, the paper does not move while the architect draws their heart out. Drafting tape is crucial for a perfect piece of art from an architect.


  • Sketchbook


Sketchbooks are essential tools for an architecture student. Since you can have a creative idea at any part of the day, you may easily pen it down if you have a sketchbook near you. An artistic mind must have a sketchbook with them so that they have their precious ideas saved with them.


  • Precision Cutting Knife


Architecture studies often include models made of wood, clay plastic, or thin metal. They cannot be cut with any cutter, so a precision cutting knife is used to cut these materials finely.


  • Lining pens


Lining pens are the best tool that an architect can have. They are the most efficient in drawing fine lines without fearing ink spills or leakage.


  • Drawing Board


Architects need a flat surface when drafting or drawing. Uneven surfaces affect the drawings since the pencil will not work smoothly. The drafting paper will also have bumps on the uneven surfaces, which would cause lines on the form that makes the drawing rough.

The drawing board also has clamping clips that hold the paper onto the board. It has two side drawers that help store some tools you may need while drawing.


  • T-square


T-squares are the identity tool for architects. Whenever you see someone with a T-square, you may immediately guess they are from an architectural background. It is a 12-inch metal ruler of high-impact carbon steel, making it long-lasting. It is flexible and can also be used as an L-shape or L ruler.

Continue Reading

More in Tools & Hardware

To Top