Whether you’re dealing with the aftermath of a flood or cleaning, managing a damped carpet is beyond a joke.
Wet carpets can lead to an incredibly unpleasant problem (formation of mould and mildew).
Additionally, it can cause significant damage to your floors too. Hence, attend to your carpets immediately after the flood occurs or the cleaning task gets completed. If extensive damage is caused, you may need to look for a water damage restoration company to help you. If you don’t deal with the damage, it could lead to bigger problems in the future.
Well, how to dry your wet carpets successfully depends on its size, climate, and humidity.
Don’t feel distressed; we’re here to guide you on how to dry your damp carpets after flooding or washing. So, pay close attention!
How to dry your carpets after a flood?
In case your home has become a victim of the flood, then your carpets are likely to get soaked. Firstly, you need to identify whether or not it is worth saving. If yes, then go ahead and read the blog.
Discharge the stranded water:
In this step, you should appropriately access the situation. Is your carpet area stranded with water?
Is your carpet still dampened? If the answer to these questions is a simple “yes”, then you need to discharge the water with a submersible pump.
Renting of the submersible pump would simplify your job, but if you can’t, then use a bucket to pump out the water.
Bring in the shop vac:
Soon after scooping out water from the floor, you need to remove the excess water from the carpet.
There are high chances of damp carpet not drying with fans and towels as the water is soaked all way through. In such cases, you can take the help of a shop vac.
This equipment is basically like a vacuum cleaner, which will pull out all the excess water from the carpet. Simultaneously check its tank also and empty it as it gets full.
We would recommend you to not use a vacuum cleaner for this process as they can’t remove water.
Use a dehumidifier:
A dehumidifier can be handy in removing the moisture from your room. So, make sure you place it in the room, but away from the wet areas as that can be dangerous. Additionally, use a waterproof dehumidifier, if possible.
Homeowners often fear that padding and subfloor get wet due to floods, and the situation can get worsen.
Well, in that case, you might need to roll back your carpets to expose the water filling below and remove it. This step becomes vital if the floodwater gets mixed with the sewage water.
Generally, carpet padding won’t last long if it is with water for a longer time. Hence, pull out the padding from your carpets and replace them.
Don’t bother to dry it if it’s wet as replacing it would be a cheap and better solution. Along with this, also check the subfloor and use fans to dry it properly.
Clean your carpet:
Before your carpet becomes completely dry, wash it to remove bacteria, dirt, or stains from the water damage. You can pick one out of several natural ways of removing carpet stains.
Above were the steps which will help you dry the carpets after a flood. In case you’re wondering how to dry it after cleaning, then we’ll explain to you that also. For that, keep reading the blog.
How to dry your carpets after washing?
Create air circulation:
The vital factor that can affect the time of drying carpets is its cleaning method.
Dry cleaned takes 2-4 hours, whereas steam cleaned takes 6-12 hours. You can render more air to it for drying your carpets faster and easier.
The best ways are opening the nearby windows and turning on the fan in your room. If you’ve windows, then open it to introduce fresh air to do all the work.
This way, you can also avoid the musty and damp smells that some carpets develop in a shut room.
Remove moisture from the air:
Inarguably, your carpets can only dry when its damped fibres get enough of air. To let it happen, the air around your carpet must be drier than your carpet itself.
Using HVAC systems can help you achieve the goal. It will be beneficial when the room has no windows, and the climate outside is rainy.
You can leave the system on for the whole night to ensure that the room air is as dry as possible.
It will wick the water away from your carpet until it dries completely. If you still fail to dry your carpets, then use a shop vac to eliminate water from it.
Conclusion: Patience is the key!
Damp carpets will dry based on the humidity of the surrounding air and its specifications. It will take its own time to dry, so borrow some patience.
You can consider the above guidance to speed up your drying process. But still, if it’s taking two to three days, then seek a professional’s help.
They know about the ins and outs of this process so they can handle the job flawlessly.